MCS 3W Dampers - 2019 STR Solo Nats Winning Shocks

3 months ago
Price
$6,200.00
Brand
Other
Available on
Miata.net
Location
Frederick, MD
Description

Motion Control Suspension 3 Way Dampers / Karcepts Spec
This set won the 2019 SCCA Solo Nationals and ProSolo Championship in STR.
These are my favorite dampers and about the best money can buy.
Selling to fund a new project.
-Installed brand new on 3/15/19; removed after 2019 Nationals
-Attended ~20 autox events
-Street driven less than 100 miles; car was trailered everywhere
-Perch heights set and corner balanced to 50.0% (should end up similar when transferred to another ND)
-Cleaned up and ready to ship
Asking $4,000
New = $5,900 http://motioncontrolsuspension.com/a...tions-pricing/
For $4800, will include brand new:
4x Karcepts Spherical Upper Shock Mounts
4x Hyperco Main Springs
4x Hypcerco Helper Springs
4x Karcepts Delrin Main-to-Helper Connection Plates
1x Karcepts Remote Damper Canister Mounting Kit
New = $6,200 http://www.karcepts.com/shop/product.php?id_product=132
2019 STR ND Solo Nats Setup Below:
Front Suspension:
Motion Control Suspension 3W Dampers (Karcepts Spec), 130 PSI Canister Pressure
(Assume Full Soft = 0)
Rebound = 11
High Speed Compression = 3
Low Speed Compression = 7
675 lbs/in Hyperco Main Springs
Hyperco Helper Springs
Karcepts Delrin Main Spring to Helper Spring Connection Plates
Karcepts ND Front Spherical Top Hats
Karcepts ND Front Sway Bar Kit - 1.25" O.D. x 0.250" Wall - Holes 3/3
Karcepts ND Front Subframe Reinforcement Kit
Karcepts ND Pro Series Front Camber Bushings
12.6" Ride Height (center of hub to fender edge)
-4.1 Degrees Camber
0 Toe
Caster (Not measured, but set where the wheels are most centered fore/aft inside the wheel wells.
This position minimizes fender liner rubbing and will be at or near the maximum static camber position.)
OEM (non-Brembo) Calipers
Wilwood 11" Front Rotor/Hat Assemblies
Hawk HPS 5.0 Pads
245/40/17 Yokohama A052 7/32" - 28psi
Rear Suspension:
Motion Control Suspension 3W Dampers (Karcepts Spec), 140 PSI Canister Pressure
(Assume Full Soft = 0)
Rebound = 6
High Speed Compression = 4
Low Speed Compression = 9
325 lbs/in Hyperco Main Springs
Hyperco Helper Springs
Karcepts Delrin Main Spring to Helper Spring Connection Plates
Karcepts ND Rear Spherical Top Hats
Karcepts ND Rear Sway Bar Kit - 0.625" O.D. x 0.095" Wall - Holes 2/2
12.9" Ride Height (center of hub to fender edge)
-2.5 Degrees Camber
0.16" Total Toe-In
OEM Calipers
OEM Rotors
Hawk HPS Pads
245/40/17 Yokohama A052 7/32" - 29psi
Power Mods:
JDL 4-1 Header
Goodwin Mid-Pipe (welded slip fit connection)
HKS Legamax Sport Exhaust
Karcepts mazdaEdit Tune
Misc/Other:
Shorai LFX14 Battery
G-Force Lap Belt
Karcepts Weighted Black Delrin Shift Knob